The JT/JL are plagued by major problem- both joints are pressed in from the bottom and with a shaft failure the lower balljoint gets punched out and the upper follows suit. The JT/JL Balljoint Delete System upper presses in from the top, the lower from the bottom. If a shaft failure occurs and the lower assembly is contacted, the upper joint features a ledge keeping the outer knuckle from falling off completely. Key features include:
- 3/4” PFTE Teflon coated bearings for long bearing life and smooth operation (F1 fit bearings throughout)
- Custom machined hardened hardware with lower spacers
- Buna O-ring seals top of assemblies to keep debris out
-If you’re using upgraded Reid outer knuckles please make a note of that on your order. There are differences in the thicknesses that will require different sized components within the system.
- All Delete Systems products are backed by a 2 year/30,000 mile warranty which will replace any worn out spherical bearings or broken hardware for free. *Warranty registration is attached to Shopify tracking info when package ships.
IMPORTANT NOTICE: limited run numbers of this system are being produced at this time. Estimated shipping time of the systems currently in machining is May 15th-17th.